The oval shape on the right indicates that the OCX control is loaded correctly-->
Port Configure：
Port： Baud： Export：
MSR Test: (The Device with Serial Port)
Track1 Data：
Track2 Data：
Track3 Data：
IC Test:(Device will set 'Auto Detect Contact or Contactless Card',Before all the test)
Send APDU：
Respond APDU & Status：
Mifare1 Card Test(Use the 'FFFFFFFFFFFF' as the key for all the test,you can modify in the html source)
Sector No.: Block No.:
PinPad Test:
Sound Prompt:
shenzhen SYNOC Technology limited SC(2010-2017) v1.2