Il processo sulla ristrutturazione per OCB-D008?
Doris Jiang
OCOM originale
2014-09-12 23:53:51
1) & nbsp; & nbsp; Si prega di & nbsp; usare & nbsp; TF & nbsp; carta & nbsp; che & nbsp; è & nbsp; & lt; = & nbsp; 4G.
2) Before flashing, please save the “EBOOT” and “NK” in TF card, then put the TF card into the machine . after Turning on your machine , check whether can find the TF card content. .(because some TF card quality is not well, the machine cannot identify, so you need to use good one)
Lampeggiante & nbsp; processo:
1) Turn it off, press the “FN” key, keep pressing, press the “POWER” button.
2) Come flash interface, choose 1, brush “E – BOOT”, completed, automatic shutdown.
3) Turn it off, press the “FN” key, keep pressing, press the “POWER” button.
4) Come flash interface, choose 2, brush “NK”, completed, Automatic calibration interface, manual calibration screen, enter the main interface
5) & nbsp; completo & nbsp; Flash & nbsp; processo
Correlati & nbsp; documento:
"EBOOT" & nbsp; e & nbsp; "NK":
http://pan.baidu.com/s/1ntFgD3j
Video & nbsp ;:
http://pan.baidu.com/s/1pJBEJLT
2) Before flashing, please save the “EBOOT” and “NK” in TF card, then put the TF card into the machine . after Turning on your machine , check whether can find the TF card content. .(because some TF card quality is not well, the machine cannot identify, so you need to use good one)
Lampeggiante & nbsp; processo:
1) Turn it off, press the “FN” key, keep pressing, press the “POWER” button.
2) Come flash interface, choose 1, brush “E – BOOT”, completed, automatic shutdown.
3) Turn it off, press the “FN” key, keep pressing, press the “POWER” button.
4) Come flash interface, choose 2, brush “NK”, completed, Automatic calibration interface, manual calibration screen, enter the main interface
5) & nbsp; completo & nbsp; Flash & nbsp; processo
Correlati & nbsp; documento:
"EBOOT" & nbsp; e & nbsp; "NK":

Video & nbsp ;:
