عملية في مجال تجديد لOCBS-D008؟
دوريس جيانغ
OCOM الأصل
2014-09-12 23:53:51
1) ونبسب؛ & نبسب؛ الرجاء ونبسب؛ استخدام ونبسب؛ TF ونبسب؛ بطاقة ونبسب؛ الذي ونبسب؛ هو ونبسب؛ و LT. = & نبسب؛ 4G.
2) Before flashing, please save the “EBOOT” and “NK” in TF card, then put the TF card into the machine . after Turning on your machine , check whether can find the TF card content. .(because some TF card quality is not well, the machine cannot identify, so you need to use good one)
امض ونبسب؛ العملية:
1) Turn it off, press the “FN” key, keep pressing, press the “POWER” button.
2) Come flash interface, choose 1, brush “E – BOOT”, completed, automatic shutdown.
3) Turn it off, press the “FN” key, keep pressing, press the “POWER” button.
4) Come flash interface, choose 2, brush “NK”, completed, Automatic calibration interface, manual calibration screen, enter the main interface
5) ونبسب؛ الكامل ونبسب؛ فلاش ونبسب؛ عملية
ذات الصلة ونبسب؛ الوثيقة:
"EBOOT" & نبسب؛ & nbsp؛ و "NK":
http://pan.baidu.com/s/1ntFgD3j
فيديو ونبسب؛:http://pan.baidu.com/s/1pJBEJLT
2) Before flashing, please save the “EBOOT” and “NK” in TF card, then put the TF card into the machine . after Turning on your machine , check whether can find the TF card content. .(because some TF card quality is not well, the machine cannot identify, so you need to use good one)
امض ونبسب؛ العملية:
1) Turn it off, press the “FN” key, keep pressing, press the “POWER” button.
2) Come flash interface, choose 1, brush “E – BOOT”, completed, automatic shutdown.
3) Turn it off, press the “FN” key, keep pressing, press the “POWER” button.
4) Come flash interface, choose 2, brush “NK”, completed, Automatic calibration interface, manual calibration screen, enter the main interface
5) ونبسب؛ الكامل ونبسب؛ فلاش ونبسب؛ عملية
ذات الصلة ونبسب؛ الوثيقة:
"EBOOT" & نبسب؛ & nbsp؛ و "NK":
http://pan.baidu.com/s/1ntFgD3jفيديو ونبسب؛:
http://pan.baidu.com/s/1pJBEJLT