Home > News > Industry > 58mm Bluetooth Printer Button .....
Catalogues
Catalogues
Certifications
certi1
Contact us
Address: 4/F, Block 10, Zhongxing Industrial Park, Chuangye Road, Nanshan District,  Shenzhen 518054,China
Website: www.ocominc.com,
www.possolution.com.cn;
E-mail:ocom@ocominc.com,
info@possolution.com.cn;
Tel: +86.755.86053207 ext 800;
Fax: +86.755.86053207 ext 868;
QQ: 2485890637;
Wechat: szocominc, hj34924238;
Whatsapp:008613352932860,Contact Now
Customer Comment

    News

    58mm Bluetooth Printer Button Operating Instructions

    • Author:Hans Shen
    • Source:Original
    • Release on :2014-11-10

                                           58mm Bluetooth Printer Button Operating Instructions

    keywords: bluetooth Printer,mini Printer,58mm bluetooth printer,

    POWER(Green Light)

    FEED(Rad Light )

    Printer Status

    OFF

    OFF

    Printer Close

    ON(Always)

    Off

    Printer open and have paper

    ON(Always)

    Flash

    Printer Open , without paper

    ON(Always)

    ON(Always)

    Printer have paper

    Under the normal working status, the paper feeding begins when press 【FEED】 button, and stop when loosen【FEED】 button.

    the printer paper feed

    Power off the printer, then hold down the【FEED】button and press the power button at the same time. Wait 2 seconds ,then loosen the【FEED】button,the current setting will be printed out.

    The printer Self test

    Power off the printer, then hold down the【FEED】button and press the power button at the same time. Wait until the power indicator &【ERROR】led are both on, and then 【ERROR】led goes off, then loosen the【FEED】button, the language setting status will be printed out.

    Transformation in both English and Chinese

    Power off the printer, then hold down the【FEED】button and press the power button at the same time. Wait until the power indicator &【ERROR】led are both on, and then 【ERROR】led goes out, after, 【ERROR】led goes on again ,then loosen the【FEED】button, the density setting status will be printed out. (It has three levels setting for printing density, it is a circle Low levelàMiddle levelàHigh levelàLow level…, Please switch the density status by repeating operation presented above.)

    Set printing density

     Power off the printer, hold down the【MODE】button and press the power button at the same time. Wait until the power indicator &【ERROR】led are both on, and then 【ERROR】led goes out, then loosen the【MODE】button. The printer turns into the hexadecimal printing mode and print the presentation.Way to quit hexadecimal printing : The way to quit hexadecimal printing mode is switch off the printer .

    Hexadecimal printing